Foxconn 6100K8MA-RS Bedienungsanleitung PDF herunterladen (Seite 29)

Chapter 2 Installation Instructions

Jumpers

Users can change the jumper settings on this motherboard if necessary. This

section explains how to use the various functions of this motherboard by chang-

ing the jumper settings. Users should read the following contents carefully prior

to modifying any jumper settings.

Description of Jumpers

1.For the jumpers on this motherboard, pin 1 can be identified by the silk-

screen printed “ ” next to it. However, in this manual, pin 1 is simply

labeled as “1”.

2.The following table provides some explanations of the jumper pin settings.

Users should refer to the table while adjusting jumper settings.

Clear CMOS Jumper: CLR_CMOS

This motherboard uses the CMOS RAM to store all

the set parameters. The CMOS can be cleared by

removing the CMOS jumper. Reference the following

process.

1. Turn off the AC power supply and short pins 1 and 2

on the jumper.

2. Return the jumper to the normal setting (locking pins

2 and 3 together with the jumper cap).

3. Turn on the system. The BIOS is returned to the

default settings.

Jumper Diagram Definition Description

1-2 Set pin 1 and pin 2 closed

2-3 Set pin 2 and pin 3 closed

Closed Set the pin closed

Open Set the pin opened

Clear CMOS Jumper

Normal

(default)

Clear

Warning:

1.Disconnect the power cable before adjusting the jumper

settings.

2.DO NOT clear the CMOS while the system is turned on.

PDF 文件使用 "pdfFactory" 试用版本创建 ³ ³ www.fineprint.com.cn

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 93 94

Keine Kommentare

Foxconn 6100K8MA-RS Bedienungsanleitung Seite 29