Foxconn 865A01-PE-6EKRS Bedienungsanleitung PDF herunterladen (Seite 20)

Chapter 2 Installation Instructions

865A01 G/PE User Manual

1.Locate the CPU retention mechanism

base (surrounds the CPU socket).

3. Attach the fan to the base.

Installation of CPU Fan

New technology allows processors to run at higher and higher frequencies.

To avoid problems arising from high-speed operation, for example,

overheating, you need to install the proper fan. The following procedure is

provided for reference only, please refer to your CPU fan user guide for the

actual procedure.

2.If required, apply a light coating of

silica gel to the top of the CPU.

NOTE: The CPU heatsink may have

a pre-applied thermal compound. In

that case, the silica gel is not required.

4.Connect the fan’s power cable

to the appropriate 3-pin terminal

on the motherboard.

Warning:

Excessive temperatures will severely damage the CPU and

system. Therefore, make sure that the cooling fan works nor-

mally at all times in order to prevent overheating and damaging

to the CPU.

865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0212

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 123 124

Keine Kommentare

Foxconn 865A01-PE-6EKRS Bedienungsanleitung Seite 20