Foxconn 865A01-PE-6EKRS Bedienungsanleitung PDF herunterladen (Seite 19)

Chapter 2 Installation Instructions

865A01 G/PE User Manual

CPU

This motherboard accepts Intel socket 478 processors (CPUs) with a front side

bus (FSB) of 400/533/800 MHz Processors with Hyper-Threading technology

are supported.

1. Unlock the socket by pressing the le-

ver sideways, then lift it up to a 90

angle.

2. Align the cut edge to the gap in the

base of the socket. Carefully insert

the CPU into the socket until it fits in

place.

3. When the CPU is in place, press it

firmly on the socket while you push

down the socket lever to secure the

CPU. The lever clicks on the side tab

to indicate that it is locked.

Gap in the base

Installation of CPU

Follow these steps to install the CPU.

Push down the socket

lever to secure the CPU.

Cut edge

Attention:

The CPU pins must be properly aligned with the holes in the

socket, otherwise the CPU may be damaged.

865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0211

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 123 124

Keine Kommentare

Foxconn 865A01-PE-6EKRS Bedienungsanleitung Seite 19