Foxconn 865A01-PE-6EKRS Bedienungsanleitung PDF herunterladen (Seite 48)

Chapter 2 Installation Instructions

865A01 G/PE User Manual

Starting up for the first time

1. After making all the connections, replace the system case cover.

2. Be sure that all switches are off.

3. Turn on the devices in the following order.

a. Monitor

b. External SCSI devices (starting with the last device on the chain)

c. System power

4. After applying power Led on the system front panel case lights up. For ATX

power supplies, the system LED lights up when you press the ATX power

switch. If your monitor complies with green standards or if it has a power

standby feature, the monitor LED may light up or switch between orange and

green after the system LED turns on. The system then runs the power-on

tests. While the tests are running, the BIOS beeps or additional mes

sages appear on the screen. If you do not see anything within 30 seconds

from the time you turned on the power, the system may have failed a power-

on test. Check the jumper settings and connections or call your retailer for

assistance.

5. At power on, hold down <Delete> to enter BIOS Setup. Follow the

instructions in Chapter 3.

Powering off the computer

1. Using the OS shut down function

If you use windows 98SE/ME/2000/XP, click the Start button, click Shut Down,

then the OK button to shut down the computer. The power supply should turn

off after Windows shuts down.

2.Using the dual function power switch

While the system is ON, pressing the power switch for less than 4

seconds puts the system to sleep mode or to soft-off mode, depending

on the BIOS setting. Pressing the power switch for more than 4 seconds

lets the system enter the soft-off mode regardless of the BIOS setting.

865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0240

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 123 124

Keine Kommentare

Foxconn 865A01-PE-6EKRS Bedienungsanleitung Seite 48