Foxconn 865A01-PE-6EKRS Bedienungsanleitung PDF herunterladen (Seite 62)

Chapter 3 BIOS Description

865A01 G/PE User Manual

IDE Primary Master/Slave UDMA (Default: Auto)

This option is used to set whether the IDE Primary Master/Slave Unit supports

Ultra DMA. With it set to Auto, BIOS will automatically test whether IDE sup

ports Ultra DMA; with it set to Disabled, the Ultra DMA function will be locked.

On-Chip Secondary PCI IDE (Default: Enabled)

This option is used to set whether the On-chip Secondary PCI IDE is used. The

available setting values are: Disabled and Enabled.

IDE Secondary Master/Slave PIO (Default: Auto)

This option is used to set the PIO transfer mode under the IDE Secondary Master/

Slave Controller. With it set to Auto, BIOS will automatically detect whether IDE

supports the Ultra DMA; with it set to Disabled, the Ultra DMA function will be

locked.

IDE Secondary Master/Slave UDMA (Default: Auto)

This option is used to set whether the second group of primary/secondary

equipment supports Ultra DMA. If the setting is Auto, BIOS will automatically

detect whether the IDE hard disk supports Ultra DMA; if the setting is Disabled,

it will be locked

SATA Mode(Default: IDE)

This option is used to set the SATA mode. When it is set to IDE, the mode will

be IDE only. The available setting values are: IDE and RAID.

Note:If want to use Raid Function, On-Chip Serial ATA must be set Enhance

mode.

On-Chip Serial ATA (Default: Auto)

This option is used to set the On-chip Serial ATA function. When it is set to

Disabled, the function will be locked; when it is set to Auto, the BIOS will lock

the function; with it set to Combined Mode, four HDDs at most will be

supported; with it set to Enhanced Mode, six HDDs at most will be supported

(for those under Windows 2000 and WindowsXP only); with it set to S-ATA Only,

only the S-ATA HDD can be used.

Serial ATA Port 0/1 Mode (Default: Primary Master/Primary Slave)

This option is used to set the Serial ATA Port 0/1 Mode.With the mode set to

Primary Master/Slave, the Primary IDE cannot be used; only the secondary

IDE and SATA ports 0/1 will be available. With the mode set to Secondary

Master/Slave, the secondary IDE will be unavailable; only the primary IDE and

SATA ports 0/1 can be used. With the mode set to Primary/Secondary Master,

and the option SATA Only selected, the SATA HDD acts as both the primary and

secondary drive. With the mode set to SATA 0/1 Master and the option SATA

Enhanced Mode selected, both IDE ports and both SATA ports will be available.

865A01-FOXCONN-V1.3-EN-121603.p65 2004-5-27, 18:0254

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 123 124

Keine Kommentare

Foxconn 865A01-PE-6EKRS Bedienungsanleitung Seite 62